Professional China Medical Hemodialysis Machine Dialysis Machine
This haemodialysis machine is specially designed, produced and sold
for renal failure patients to receive haemodialysis.It is
applicable for chronic renal failure and other blood Purification
1,Classical and perfect model designed.
2,Two persons can be trained freely for first time.
3,All accessories or spare parts with tools can be along with
hemodialysis machine can be set along.
4,Rich knowledge engineer and sales can be serve for you.
5,One year guarantee time,5years spare parts supplied at least.
Application Purpose of this Device
YJ-D2000 haemodialysis machine is applicable for chronic renal
failure and other blood Purification treatment.
This device should be used in medical units.
This device is specially designed, produced and sold for renal
failure patients to receive haemodialysis, which is not allowed to
be used for other purposes.
Forms of Therapy:
Haemodialysis, Isolated Ultrafiltration, Sequential
Ultrafiltration, Hemoperfusion, etc.
Intelligent Double Operation System
LCD touch screen with button interface
Emergency power 30Mins (Optional)
Spare Pump (for standby and also can be used for hemoperfustion).
Hydraulic compartment(Balance chamber + UF pump).
Operation, Alarm information Memory function.
A/B Ceramic proportion pump , High precision, Corrosion-proof,
Dialysate temperature: preset range 34.0ºC~39.0ºC
Dialysate flux: 300~800 ml/min
Dialysate concentration: 12.1 mS/cm ~16.0 ms/cm, ±0.1 ms/cm
Dialysate mixing ratio: can set variety ratio.
UF rate Flow range: 0 ml/h ~4000 ml/h
Resolution ratio: 1ml
Precision: ±30 ml/h
Venous pressure: -180 mmHg ~+600 mmHg, ±10 mmHg
Arterial pressure : -380 mmHg ~+400 mmHg, ±10 mmHg
TMP pressure : -180 mmHg ~+600 mmHg, ±20 mmHg
Blood pump flow range: 20 ml/min ~400 ml/min(diameter:Ф6 mm)
Spare pump flow range: 30 ml/min ~600 ml/min(diameter:Ф8 mm)
Resolution ratio: 1 ml
Precision: error range ±10ml or 10% of reading
Syringe size: 20, 30, 50 ml
Flow range: 0 ml/h ~10 ml/h
Resolution ratio: 0.1ml
1.Hot decalcification :
Time: about 20 minutes
Temperature: 30~60ºC, 500ml/min.
2.Chemical disinfection :
Time: about 45 minutes
Temperature: 30~40ºC, 500ml/min.
3. Heat disinfection :
Time: about 60 minutes
Temperature: >85ºC, 300ml/min.
Storage Environment Storage temperature should be between 5ºC~40ºC,
at relative humidity of no more than 80%.
Monitoring System :
Dialysate temperature: preset range 34.0ºC~39.0ºC, ±0.5ºC
Blood leak detection: Photochromic
Alarm when erythrocyte specific volume is 0.32±0.02 or blood leak
volume is equal or more than 1ml per liter of dialysate
Bubble detection: ultrasonic
Alarm when a single air bubble volume is more than 200µl at
200ml/min blood flow
Conductivity: acoustic-optic, ±0.5%
Main Parameters For Hemodialysis Machine:
|Working environment||temperature 10ºC ~30ºC (at relative humidity of no more than 70%.)|
|Water input pressure||0.15 MPa ~0.6 MPa|
|Water input temperature||10ºC~30ºC|
|Machine Size||380mm×400mm×1380mm (L*W*H)|
All disposable accessories or other accessories such as
Reprocessor,Dialyzer Rinse Machine,RO Water Machine,Dialysate
Dosing Device,Dialysis Chair,Dialyzer,Hemoditoxifier,Anti-cross
Infection Joint,Test Paper,Dialysis Catheter,Disposable A.V.
Fistula Needel,Disinfectant,Dialysis Concentrate and
Powder,Haemodialysis tubing package,etc.
Note:One year quality guarantee and 24 hours phone service for all the